Publicité
5 SCPI Programming Reference
Related Software
BV9200B and BV9201B PathWave BenchVue Advanced Power Control and Analysis Soft-
ware
The BV9200 software provides fast and easy access to the advanced sourcing and measurement
functionality of your RP7900 Series Regenerative Power System without any programming. The
BV9200B will allow you to control up to four instruments at once, while the BV9201B will allow you to
control a single instrument. These are flexible tools for any application, which let you control any of the
RP7900 Series' 20 models. Note that this software does not support primary/secondary operation.
Learn more and download a free trail at: www.keysight.com/find/BV9200.
DG9000 Advanced/Multi-Input PV Inverter Test Software
The DG9000 software lets you control the output of up to twelve RPS instruments (or
primary/secondary combinations), as well as easily create, visualize, and download solar/photovoltaic
I-V curves to the instrument using the PV Model Workspace. Once a curve has been downloaded to
the instrument, you can enable the output and watch as their PV inverter searches for the maximum
power point, gaining insight into your MPPT algorithm.
IO Libraries and Instrument Drivers
You can download the Keysight IO Libraries Suite software, along with IVI-COM and LabVIEW drivers
from the Keysight Developer Network at www.keysight.com/find/adn.
Interface Documentation
For detailed information about interface connections, refer to the documentation included with the
Keysight IO Libraries Suite. Or you can download the guide from the Web at
www.keysight.com/find/connectivity.
Web Interface
The Keysight RPS provides a Web interface that is built into the instrument. You can use this interface
over LAN for remote access and control of the instrument via a Web browser. See
Using the Web
Interface
for details.
180
Keysight RP7970 & RP7980 Series Operating and Service Guide
Publicité
