Publicité
1 Quick Reference
Common Characteristic
Acoustic statement
(European Machinery Directive)
Environmental
Operating environment:
Temperature range:
Relative humidity:
Altitude:
Storage temperature:
Regulatory Compliance
EMC:
Safety:
AC Input
Connections:
Phase and range:
Frequency:
Input VA:
Input current per phase:
Efficiency at full power:
Power Factor:
Output Terminal Isolation
for 500 V units
for 1 kV units:
for 1.5 kV and 2 kV units:
Typical Weight
Dimensions
1 A sound pressure level of 80 dBA above a reference sound pressure of 20 μPa is at present regarded by man authorities as the threshold at
which a hazard may be caused. Special means, such as the use of protective earpieces, can make a higher level non-hazardous to an
operator.
2 Applies at 380-480 Vac nominal
42
Acoustic noise emission
LpA 80.92 dB at Operator position: 1
LpA 75.57 dB at Bystander position
LpA 62.04 at Idle fan speed
Normal operation mode per ISO 7779
Indoor use, installation category III, pollution degree 2
0°C to 55°C (Maximum continuous current available is derated at 1% of rating per degree C from
40°C to 55°C)
95% or less (non-condensing)
Up to 2000 meters
-30°C to 70°C
Complies with European EMC Directive for test and measurement products
Complies with Australian standard and carries C-Tick mark
This ISM device complies with Canadian ICES-001
Cet appareil ISM est conforme à la norme NMB-001 du Canada
Complies with European Low Voltage Directive and carries the CE mark.
Conforms to US and Canadian safety regulations.
Declarations of Conformity for this product may be downloaded from the Web. Go to
http://www.keysight.com/go/conformity
L1, L2, L3, N, PE
(Wye-type
ac mains wiring with a neutral connection)
L1, L2, L3, PE (Wye-type ac mains wiring (no neutral) after firmware rev B.06.03.985)
3-phase; 380-480 Vac nominal, line-to-line ±10%
3-phase; 200-208 Vac nominal, line-to-line ±10% (RP798xA after firmware rev B.06.03.1003)
50/60 Hz
23 kVA for 20 kW models, 34 kVA for 30 kW models 2
36 A for 20 kW models, 52 A for 30 kW models 2
90%
0.99 @ nominal input and rated power
No output terminal may be more than ±500 Vdc from any other terminal or chassis ground
No output terminal may be more than ±1000 Vdc from any other terminal or chassis ground
No output terminal may be more than ±2000 Vdc from any other terminal or chassis ground
82 lbs. (37.3 kg) for 20 kW models
126 lbs. (57.2 kg) for 30 kW models
See
Outline Diagrams
for details
Keysight RP7970 & RP7980 Series Operating and Service Guide
All Models
and click on "Declarations of Conformity."
Publicité
