Publicité
1 Quick Reference
Small Signal Programming Response
The following graphs show the output voltage and current programming response characteristic. The
voltage response applies with no load (open-circuit) conditions. The current response applies with ac
short-circuit conditions where the DUT is a low ac impedance. The characteristic is valid when
operating above 10% of the rated output of the unit.
For 20 kW and 30 kW Models
Programming Bandwidth Amplitude (for all 20kW and 30kW units)
Programming Bandwidth Phase (for all 20kW and 30kW units)
Voltage Programming Response (Comp 0-2)
Current Programming Response
60
Keysight RP7970 & RP7980 Series Operating and Service Guide
Publicité
