Publicité
1 Quick Reference
:VOLTage
[:DC]? [<start_index>, <points>]
:ACDC?
:HIGH?
:LOW?
:MAXimum?
:MINimum?
:AHOur? [IGNORE_OVLD]
:ARRAY
:CURRent
[:DC]? [<start_index>, <points>]
:POWer
[:DC]? [<start_index>, <points>]
:VOLTage
[:DC]? [<start_index>, <points>]
:ELOG <maxrecords>
:WHOur? [IGNORE_OVLD]
FORMat
[:DATA] ASCII | REAL
:BORDer NORMal | SWAPped
HCOPy
:SDUMp
:DATA? [BMP|GIF|PNG]
:DATA
:FORMat BMP|GIF|PNG
IEEE-488
Common Commands
*CLS
Clear status command.
*ESE <value>
Event status enable command and query.
*ESR?
Event status event query.
*IDN?
Identification Query.
*OPC
Sets the OPC (operation complete) bit in the standard event register.
*OPC?
Returns a 1 to the output buffer when all pending operations complete.
*OPT?
Returns a string identifying any installed options.
*RCL <value>
Recalls a saved instrument state.
*RST
Resets the instrument to pre-defined values that are either typical or safe.
*SAV <value>
Saves the instrument state to one of ten non-volatile memory locations.
*SRE <value>
Service request enable command and query.
*STB?
Status byte query.
*TRG
Trigger command.
*TST?
Self-test query.
*WAI
Pauses additional command processing until all pending operations are complete.
26
Returns the averaged measurement.
Returns the rms measurement (ac + dc).
Returns the High level of a pulse waveform.
Returns the Low level of a pulse waveform.
Returns the maximum value
Returns the minimum value
Returns the accumulated amp-hours.
Returns the instantaneous measurement.
Returns the instantaneous measurement.
Returns the instantaneous measurement.
Returns the most recent external datalog records.
Returns the accumulated watt-hours.
Specifies the format of the returned data.
Specifies how binary data is transferred.
Returns an image of the front panel display.
Specifies the format for front panel images returned.
Keysight RP7970 & RP7980 Series Operating and Service Guide
Publicité
