Bose QUIETCOMFORT ULTRA Mode D'emploi page 28

2. On your device, enable the Bluetooth feature.
NOTE: The Bluetooth feature is usually found in the Settings menu.
3. Select your headphones from the device list.
NOTE: Look for the name you entered for your headphones in the Bose app. If you
didn't name your headphones, the default name appears.
Once connected, the status light glows solid blue for 10 seconds.
NOTE: If a device is already connected, you hear "Connected to <device name>"
and then the status light glows solid blue for 10 seconds.
DISCONNECT A MOBILE DEVICE
To disconnect a mobile device, use the Bose app.
TIP: You can also use Bluetooth settings on your mobile device to disconnect.
Disabling the Bluetooth feature disconnects all other devices.
RECONNECT A MOBILE DEVICE
When powered on, the headphones try to reconnect with the two most
recently-connected devices.
NOTES:
• The devices must be within range (30 ft or 9 m) and powered on.
• Make sure the Bluetooth feature is enabled on your mobile device.
• If the multi-point connection feature is disabled, the headphones try to reconnect
with the most recently-connected device.
B LUETO OTH C O NN ECT I ON S
Bose QC Ultra Headphones
|
2 8 E N G