Display Elements As Interface; Led Status Display - Burkert 8695 Manuel D'utilisation

Type 8695
AS Interface Installation
10.5. display elements as interface
10.5.1. led status display
Bus LED red
Bus LED green
Status LED yellow
Figure 24: Description LED status display - AS-Interface
noTe!
damage or malfunction due to penetration of dirt and humidity!
• To observe protection class IP65 / IP67, screw the transparent cap in all the way.
status led yellow
led yellow
flashing Teach function is running
Puck PCB or puck holder not available
flickers
→
Insert puck PCB or puck holder
Table 8: Status LED yellow - AS-Interface
Valve led yellow
The yellow LED (valve) indicates whether the pilot valve is actuated (LED is lit yellow).
Bus led red and green
The red and green LEDs (bus) indicate the bus status:
led green led red
off off
off on
on off
flashing on
off flashing
Table 9: LED Status display bus status
POWER OFF
No data traffic (expired Watch Dog at slave address does not equal 0)
OK
Slave address equals 0
Sensor supply overloaded (Periphery error, manual actuation activated)
Valve LED yellow (pilot valve)
english
35