Publicité
Les langues disponibles
Les langues disponibles
Place the robotic mower (1) within
the mowing area, behind the
docking station (2) as illustrated,
then press the OK button.
Disconnect the power supply unit
plug from the mains, then press the
OK button.
Remove the cover. (
9.2)
Then press the OK button on the
control panel.
116
Perimeter wire with internal docking
station:
Insert the perimeter wire (1) into the cable
guides in the floor plate and guide it
through the socket (2).
Perimeter wire with external docking
station:
Route the perimeter wire (1) in the area (2)
under the floor plate. To do this, guide the
wire into the wire outlets (3, 4) – loosen the
pegs if necessary.
0478 131 9936 B - EN
Publicité
