Publicité
Les langues disponibles
Les langues disponibles
– In the immediate vicinity of a suitable
socket.
The mains connection must be close
enough to the docking station that the
respective power cables can be
connected to both the docking station
and the mains connection – do not
change the power cable of the power
supply unit.
– Level and flat.
The docking station must not be inclined
by more than 2 cm rearwards or 8 cm
forwards. Never bend the floor plate. Any
unevenness must be removed under the
floor plate so that it fully contacts the
ground.
Installation options:
The docking station can be installed
internally and externally.
0478 131 9936 B - EN
Internal docking station:
The docking station (1) is installed within
the mowing area (A), right at the edge.
There must be a free, level area (2) with a
radius of at least 1 m in front of the docking
station (1). Remove any bumps or
depressions.
External docking station:
The docking station (1) is installed outside
the mowing area (A).
In conjunction with an external
docking station, guide loops must
be installed for offset drive home.
(
12.11)
Space requirement for external docking
station:
The docking station (1) must be installed
as shown for docking and undocking to
take place correctly. The areas around the
107
Publicité
