Publicité
Les langues disponibles
Les langues disponibles
The installation kits contain perimeter wire
on a reel (1) as well as fixing pins (2) and
wire connectors (3). The standard
equipment in the installation kits may
include additional parts not required for the
installation.
9.5 Installing the battery
Lithium-ion batteries must be
treated with particular care. VIKING
recommends that you have the
battery installed by a VIKING
specialist dealer. A defective
battery must only be replaced by a
VIKING specialist dealer.
The battery remains permanently
installed in the robotic mower,
removal is only necessary prior to
disposal of the machine. (
● Set the lowest cutting height (level 1).
(
9.6)
● Place the robotic mower on its back on
a suitable surface.
110
Insert the battery (C) as shown and allow it
to engage.
20.1)
Fit the cover (F) and tighten the
screws (G). Observe a maximum
tightening torque of 1 - 2 Nm.
● Set the robotic mower on its wheels.
9.6 Adjusting the cutting height
Lowest cutting height:
Level 1 (20 mm)
Highest cutting height:
Level 8 (60 mm)
Press and turn the rotary knob (1). It
engages again when released. The
marking (2) indicates the set cutting
height.
The rotary knob can be removed
upwards from the adjustment
element. This design is
implemented for safety reasons: it
ensures that the machine cannot be
lifted and carried by the rotary knob.
9.7 Notes on initial installation
An installation assistant is
available for installation of the
robotic mower. This program
guides you through the entire
initial installation process:
● Setting the language, date and time
0478 131 9936 B - EN
Publicité
