Publicité
Les langues disponibles
Les langues disponibles
en Cleaning and servicing
▶
When not in use, always store the
universal knife in the blade guard.
Hold the universal knife by the tool
1.
handle and remove the blade
guard by pulling down from the
handle.
Clean the universal knife and
2.
blade guard under running water
using a brush.
Insert the universal knife in the
3.
blade guard.
Allow all parts to dry.
4.
Tip: You can clean the universal knife
in the blade guard in the dishwasher.
20.7 Cleaning the twin whisk
Remove both beating whisks from
1.
the twin whisk.
Carefully clean all parts under run-
2.
ning water using a brush.
Dry all parts.
3.
Position the beating whisks vertic-
4.
ally on the pins and push in firmly.
The beating whisks must move
easily.
a The beating whisks engage aud-
ibly.
Tip: You can clean the twin whisk in
the dishwasher.
20.8 Cleaning the pot
Requirement: The tool has been re-
moved. → Page 103
124
Clean the pot thoroughly.
1.
Wipe down the pot with a soft,
2.
damp cloth and then dry.
Note: If you are cleaning the pot in
the dishwasher, remove the tool
holder.
Tips
¡ You can clean the pot in the dish-
washer.
¡ You can remove light discoloura-
tion on the bottom of the pot with
water and a little vinegar.
→ "Descaling the pot", Page 124
20.9 Descaling the pot
Requirement: The first signs of
limescale are visible.
Take the pot out of the main unit.
1.
Use a normal household descaler
2.
in the pot according to the instruc-
tions.
Clean the pot with a dishwashing
3.
brush or soft cloth.
Rinse the pot with plain water.
4.
Dry the pot.
5.
20.10 Cleaning the tool
holder
Remove the tool holder.
1.
→ Page 122
Remove the silicone sealing ring
2.
from the tool holder.
Clean the silicone sealing ring with
3.
a soft cloth under running water.
Clean the tool holder with a brush
4.
under running water.
Dry all parts.
5.
Publicité
