en Manual cooking
Notes
¡ The boiling point automatism is
available in Guided Cooking re-
cipes and with automatic pro-
grammes.
¡ The boiling point automatism does
not affect the "Manual cooking"
cooking mode.
12.1 Setting the boiling point
automatism
Press
in the main menu.
1.
Press "Settings".
2.
Select the required altitude above
3.
sea level.
You can change the altitude in the
basic settings at any time.
→ "Basic settings", Page 119
To exit the basic settings, press .
4.
13 Manual cooking
Ma nua l c ook i n g
The "Manual cooking" function lets
Ma nua l c ook i n g
you prepare individual recipes exactly
to your taste. You can make flexible
use of the tools with your own para-
meters for duration, temperature and
speed.
13.1 Setting manual cooking
WARNING
Risk of fire!
Hot oil and fat ignite very quickly.
▶
Never leave hot fat or oil unatten-
ded.
▶
Only use heat-resistant oils and
fats.
▶
Never add more than 250 ml oil to
the pot.
▶
In the event of a fire never use wa-
ter to put out burning oil or fat.
▶
Switch off the appliance.
112
▶
Extinguish flames carefully using
the lid, a fire blanket or similar
item.
Alcoholic vapours may catch fire in a
hot pot.
▶
Never cook food at high temperat-
ures with a high alcohol content.
▶
Open the lid carefully.
WARNING
Risk of scalding!
Bursts of steam, liquids boiling or
slopping over and splashes of fat
may cause scalding.
▶
Do not allow liquids to boil over.
▶
Do not lean over the appliance.
▶
Do not exceed the maximum per-
mitted capacity of 3 l.
▶
Open the lid carefully.
▶
Take special care when adding hot
liquids to the pot and do not stand
too close.
▶
Place the appliance on a stable
work surface.
▶
Do not cover the filling hole in the
inner lid or stick anything over it
and make sure it is not obstructed
by ingredients that have been ad-
ded.
Requirement: The ingredients are
ready for processing.
Switch the appliance on with
1.
Open the lid completely.
2.
Press "Manual cooking" in the
3.
main menu.
a The display shows the tools.
Insert the required tool.
4.
→ "Tools and accessories",
Page 100
Select the tool inserted.
5.
a Once you have selected "Without
tools", the display automatically
switches to the temperature set-
ting.
→ "Setting the temperature",
Page 106
.