Publicité
Les langues disponibles
Les langues disponibles
6.4 Removing tools
WARNING
Risk of burns!
When removing tools, hot liquid may
slop out.
▶
Remove tools carefully, always us-
ing the spatula.
▶
Wear oven gloves.
Open the lid completely.
1.
→ "Opening and closing the lid",
Page 106
Use the opening in the handle of
2.
the spatula to pick up the tool
handle.
Carefully lift the tool out with the
3.
spatula.
Tips
¡ Put out a heat-resistant object
ready so you can set the utilised
tool down on it, e.g. a plate.
¡ Clean all parts immediately after
use so residues do not dry on.
6.5 Inserting the shredder at-
tachment with shredding
discs
The shredder attachment consists of
3 parts: the drive shaft, the inner lid
with feeding tube and the pusher.
You can cut and grate ingredients
when used in combination with the
shredding discs.
Tools and accessories en
WARNING
Risk of cutting!
The cutting discs have sharp edges.
▶
Only grip the cutting discs by the
plastic ring in the centre.
▶
Do not reach into the filling shaft.
▶
Only use the pusher to push down
ingredients.
Release the inner lid and remove.
1.
Open the outer lid with seal.
2.
Place the drive shaft on the tool
3.
holder.
a The drive shaft will noticeably en-
gage.
Close the outer lid with seal and
4.
the cover for the outer lid and lock
in place.
103
Publicité
