Nordcap EVOLUTION S Serie Manuel D'instructions page 25

keys. The "+" and "-" keys enter and exit the selected directory. Press "OK"
to perform the import operation. A message will show the number of the
program correctly copied from the USB memory to the oven memory. Remove
the USB device and refit the previously removed plug.
NOTE:
the <NO DIRECTORY> message means that there is no
USB or that it has not been correctly inserted into the slot.
•
USB EXPORT
Insert the USB device into the slot on the right side of the appliance after
removing the plug. The display will show a list of the directories in the USB
device. The <ROOT> item shows the first level of the file system. Select the
directory where the programs to be imported reside using the "SELECTION"
keys. The "+" and "-" keys enter and exit the selected directory. Press "OK"
to perform the export operation. A message will show the number of the
program correctly copied from the oven memory to the USB device. Remove
the USB device and refit the previously removed plug.
NOTE:
the <NO DIRECTORY> message means that there is no
USB or that it has not been correctly inserted into the slot.
3.4 STARTING UP THE BAKING CHAMBER WITH THE
STEAMER
This function allows "calibrated" amounts of steam to be emitted into the
baking chamber.
To enable the function, press "MENU", select the STEAM INJECTION
item with the "SELECTION" keys (↑ and ↓) then press "OK" to open the
submenu.
Scroll through the list using the "+" and "-" buttons to select the following
items.
- "On"/"Off": To switch the steam boiler on or off
- "Steam injection": emits steam into the baking chamber
- "Steam duration": sets the amount of steam, measured by the time the
electrovalve remains open.
Scroll through the list with the "SELECTION" keys as far as the required
item and press "OK" to confirm.
For the "Steam duration" item, change this parameter with the "+" and "-"
keys and then press "OK" to confirm. To return to the previous screens
without saving, press the "RETURN" key one or more times. Once enabled,
the main display will contain an icon to show that the "Steam" function is
on (fig.33). The flashing steam icon shows that the boiler is heating up. The
non-flashing steam icon indicates that the boiler has reached working
temperature and that the steam is ready to be emitted. During the steam
injection stage, the white icon becomes light blue for the amount of time set
for "Steam duration".
There is no dedicated key for the "Steam" function. If steam is used
frequently it is suggested that this function be assigned to the "HOTKEY"
(see 3.5.3) This will associate functions to the key allowing the boiler to be
controlled directly without the need to open the dedicated menu:
- press once: to inject steam into the baking chamber ("steam injection"
shortcut)
- hold down: to switch the boiler for steam production on/off ("On/Off"
function shortcut)
NOTE:
It is not possible to emit steam if the boiler has not been
enabled and/or has not reached the correct temperature to produce
steam.
When using programs containing at least one steam injection, the boiler is
switched on automatically. Switch on Timer 1 (T1) so that the steam is
discharged automatically at the programmed times.
To use Timer 1, refer to 3.2.2 ("BAKING TIMER" section). To create
programs containing the steam injection function, refer to 3.3.
In any case, the oven STOP will also deactivate Steamer heating.
3.4.1 DISCHARGING VAPOUR
Discharge of the vapours that form inside the baking chamber is enabled
using the ball knob on the front left hand side of the Oven (fig.23).
When the ball knob is pulled out. The exhaust outlet is open, when the ball
knob is pushed towards the oven, the outlet is closed.
3.5 ADDITIONAL BAKING CHAMBER SETTINGS
The equipment has further settings that are available from the main menu.
To access these functions, press the "MENU" key then scroll through the list
with the "SELECTION" keys until the required item. Press "OK" to open
the submenu.
3.5.1 LIGHTING
Used to switch the lighting on and off inside the baking chamber. Select this
menu item to manage lighting manually. The lighting status is represented
graphically on the display by a check symbol on the right of the menu item.
This check symbol means that the lighting is on.
3.5.2 CLEANING
WARNING!
Before carrying out the "Cleaning" program, it
is advisable to carefully remove any baking residues on the glass
surface.
The "Clean Oven" function can be used to eliminate cooking residues on the
inside walls of the oven by means of carbonisation. When the function is
selected, this starts the program, set to high temperatures,
for a factory set period of time. When the program has completed and the
oven is again at room temperature, it is sufficient to remove the charred
residues with a brush.
Start the "Cleaning" program by selecting the CLEANING item with the
"SELECTION" keys and press "OK" to confirm. The display will show an
icon and the message "Cleaning program in progress".
If on, the chamber lighting will switch off automatically.
At the end of the program, the oven will enter STOP mode, switching off the
power supply to the heating elements and making a buzzer sound to warn
the operator that the cleaning program is complete. The display will read
"Cleaning program completed". Press "OK" to quit and proceed to switch
off the appliance ass described in 3.9.
To stop the Oven Cleaning Program in advance, press "RETURN".
To delay the execution of the cleaning program, the POWER ON TIMER
must be programmed as follows:
- set the oven power off to the time and day of the week desired for cleaning;
- set the "Cleaning" flag on the POWER ON position for the selected day of
the week.
For more details see 3.5.4.
NOTE
: The steam exhaust valve needs to be shut during the
cleaning program and until it is completed. At the end, it is
recommended to open the valve to allow steam to be discharged.
NOTE:
The daily use of the cleaning program significantly affects
energy consumption so it is recommended to run it weekly or only when
strictly necessary.
3.5.3 HOTKEY
The "Hotkey" function ("star" key) is a key that can be customised for direct
access to a specific function, as chosen by the user.
Open the "Hotkey" menu to view the current setting, which will be
highlighted. To assign a different function to a "Hotkey", move the
highlighting with the "SELECTION" keys to the required item and press
"OK" to confirm.
If necessary, press "RETURN" until you return to the main screen.
Pressing the "Hotkey" will directly enable the selected function.
3.5.4 SWITCH ON TIMER
This function can be used to order timed start-up of the oven, setting up to two
different on and off times for every day of the week (fig. 21).
Scroll through the list using the "SELECTION" keys to select the following
items:
- "Enable/Disable": enables/disables the on timer
- "Settings": To manage the on/off programmed times
Scroll through the list with the "SELECTION" keys as far as the "Enable"
and press "OK" to confirm and enable the function. If no switch on/off times
are present, the "Settings" screen will open to enter at least one switch on/off
time.
Use the "SELECTION" keys to position the cursor on the time field for the
day of the week to be programmed. The days of the week are set out on 4
pages. The switch on times are graphically represented by "ON" and the
switch off times with "OFF". For each day of the week that includes a switch
off, it is possible to set the cleaning program to start up automatically. Times
are graphically represented as HH:MM. The symbols //:// show that switch
on/off are disabled.
Use the "+" and "-" keys to increase/reduce the selected field. In the HH field,
select the "//" symbol to disable a specific timer. Select ON in the CLEANING
field to enable the cleaning program after the scheduled switch off. At the end
of the setting process, press "OK" to confirm. Press "RETURN" to go back to
the previous screen without confirming the changes.
When the switch on timer is enabled, the top bar contains the "On Timer" icon
(fig.17 item I), while when the oven is in STOP mode, the status bar messages
also include the next time time the oven will be switched on, using the format
"ON dd hh:mm". While the oven is switching off, the status bar will read
"OFF dd hh:mm".
The settings table needs to be completed with even just one "On" to activate
the function: the oven will switch on at the first "on" chronologically enabled
and which it encounters in from the moment it is enabled.
NOTE:
Setting an "On" without setting a subsequent "Off" will still
be considered an active setting: the oven will turn on automatically at the
time set, and will have to be turned off manually. In the same way, setting
"Off" that does not involve a prior "On" will also be considered an active
setting and the oven will switch off automatically at the set time, if it was
manually switched on beforehand.
At the switch on (or off) time, an intermittent buzzer will sound and the status
icon for the timer will flash to warn of imminent switch on (or off). This
switching on or off may be interrupted by pressing the STOP (or START)
keys.
UK/8