A17
The hopper lid remained opened for more
than 1 minute.
Periodic maintenance warning
SEr
Operation
PELLET STOVES
INSTALLATION AND USE MANUAL
Close the hopper lid properly and switch on the stove.
Eventually remove the pellet from the top of the lid
micro-switch box. If it is not enough, check whether the
micro-switch box fast-on are properly connected
(IMPORTANT WARNING: Disconnect the 120V power
supply before this check!).
If this flashing messages appears when lighting the
stove, it means that the hours of operation pre-set
before the maintenance have elapsed and a new
maintenance intervention is necessary. Contact a
specialist MCZ technician.
Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited
Chapter 4
53
page