Publicité
Les langues disponibles
Les langues disponibles
SLEEP FUNCTION
4.9.
The purpose of this function is to make it faster to select a
programmed shutdown, without the need change the stoves pre-set
program.
The SLEEP function allows the user to set a countdown starting from a
minimum of 15 minutes up to a maximum of 8 hours, after
which the stove will shut off.
The SLEEP function can only be activated (and appear on the display)
when the stove is lit, i.e. when the button B is kept pressed and the
word LIGHTING appears on the display.
To set the function press Menu with the top right key. The word Date
and Time appears, scroll with the bottom right key until the word
Sleep appears, confirm with Set. With the bottom right key set the
shutdown time.
The figures 00:00 appear in the centre of the display of the control
panel; it is possible to choose the quantity of time by pressing the
bottom right or left key according to whether you want to increase or
decrease the time.
To confirm the choice press OK (top right) otherwise quit without
saving any setting with ESC (top left)
Once the sleep is set, in the initial screen the status
of the stove (on/off) alternates with the message
sleep 14.50 (example).
4.10. TIMER
This operating mode allows the programming of the start-up and
shutdown of the stove in automatic mode.
Normally,
the
stoves
deactivated.
The basic settings in PROGRAMMED mode are:
Clock
Current day
Selection of weekly / daily program
Current date and time
4.10.1.
paragraph 4.5.1.
See
How to set the current date and time.
Setting the current date and time is essential for
proper timer operation.
Operation
PELLET STOVES
INSTALLATION AND USE MANUAL
have
the
PROGRAMMED
70°F
Mode:AUTO
Temp:72°F
Esc
<
Esc
<
Esc
<
Esc
<
mode
Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited
Chapter 4
45
page
21.04
OFF
Menu
Fan:A
Set
Date setting
>
Off
Set
Chrono
>
Off
Ok
Sleep
>
02:00
Ok
Sleep
>
Publicité
