Publicité
Les langues disponibles
Les langues disponibles
4.10.2. TIMER activation and selection of a program.
SETTING OF A WEEKLY PROGRAM
This is an explanation of how to activate the TIMER function
selecting a daily or weekly program:
Press the Menu button to scroll through the date and time menu with
the relative key until the word TIMER appears. Then press the SET key
to insert a program. In the center of the display between Esc and Ok
the letters P00 appear, by scrolling with the keys below it is possible to
choose between 10 weekly preset programs built into the control panel
of the stove.
According to the tables reported in
program that best meets the heating needs of the house and save the
program number on the display of the control panel. Confirm with OK.
If none of the 10 pre-set programs meets your personal heating needs,
you can put together a personalized weekly program that suits you best
(see next paragraph).
If the keypad of the control panel is inactive for 10
seconds the control panel automatically leaves the
timer adjustment mode and does not confirm the last
setting inserted.
To confirm the TIMER choice press OK.
ATTENTION!
The TIMER function can be activated/deactivated
whether the stove is on or off.
If a timer program has been activated, in the initial
screen the stove operating status (on/off/start-up....)
alternates
(example)
SETTING OF A PERSONALIZED PROGRAM
If one of the pre-set weekly programs does not suit the heating needs
for your home, you can choose and combine various daily programs
included in the memory of the remote control to create a personalized
weekly program.
60 daily programs can be selected and you can select a
different program for each day of the week.
To activate this option, proceed as described above for setting a weekly
program, but instead of selecting one of the programs contained in the
table of the weekly programs (from P01 to P10) select the program
USER.
Once the USER program is selected, press SET and in the center of the
display the word Lu P00 appears (where P00 flashes) while in the part
below, the word CUSTOMIZE appears, by pressing the related key
(bottom right or left) it is possible to insert the daily program.
By scrolling with the bottom right or left key of the control panel it is
possible to choose the desired program from 1 to 60, by consulting the
table in par. 4.11.
Once the desired program is selected for the active day (e.g. 32 for the
day MO = Monday), press the OK key in the top right and on the
Operation
INSTALLATION AND USE MANUAL
paragraph 4.11.,
with
the
word
"TIMER
PELLET STOVES
choose the
P01
active"
Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited
Chapter 4
46
page
70°F
21.04
OFF
Mode:AUTO
Menu
Temp:72°F
Fan:A
Esc
Set
<
Date setting
>
Esc
Off
Set
<
Chrono
>
Esc
P00
Ok
<
Chrono
>
Esc
User
Ok
<
Chrono
>
Esc
Lu P00
Ok
<
Customize
>
Publicité
