MCZ Star Air Manuel De Fonctionnement Et D'entretien page 26

Position the stove without its cladding and connect it to the flue pipe.
Use the four adjustable feet (J) to get the stove correctly leveled so
that the smoke outlet (S) is lined up with the connecting pipe (H) .
Once the operations for connection are complete, assemble the
cladding (ceramic or steel sides).
If the stove needs to be connected to a pellet vent which goes through
the wall take care to make sure that the joint is not stressed.
If the smoke outlet of the stove is forced or used
improperly to lift it or position it, the operation of the
stove can be damaged irreparably.
H
S
Installation and fitting
PELLET STOVES
INSTALLATION AND USE MANUAL
J
1. Turn the feet clockwise to
lower the stove
2. Turn
clockwise
stove
Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited
Chapter 3
26
page
J
the feet counter-
to lower the