MCZ Star Air Manuel De Fonctionnement Et D'entretien page 44

BLOWER CONTROLS
4.8.
The Star and Ego stove are equipped with an internal heat distribution
blower. It can be set to 5 different speeds at any time regardless of the
whether the stove is in manual or automatic mode.
5 speeds can be selected manually or be set up as an automatic
function.
To select the speed, after pressing the bottom right button, press it
again to increase or decrease the fan power.
In addition to 5th speed there is an additional selection called AUTO
function. With this option selected, the stove will automatically select
the fan speed based on the flame level.
This option can be simply selected by pressing the bottom right key,
scrolling through the various speeds 1-2-3-4-5. On the control panel
until the letter A appears.
Example with ventilation set to AUTO:
If the flame is at power level 3, the fan will automatically set to speed
3. If the flame is at power level 5, the fan will automatically set to
speed 5, and so on.
If the keypad of the control panel is inactive for 10
seconds the remote control automatically leaves the
fan adjustment mode and does not confirm the last
setting inserted.
In selecting the fan speed, it is advisable not to
select very low speeds (1 or 2) when the stove is at
maximum power as this may cause the stove to
overheat.
Operation
PELLET STOVES
INSTALLATION AND USE MANUAL
Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited
Chapter 4
44
page