Corghi EXACT 70 II Manuel D'utilisation page 69

If the user set-up field "Alignment customisa-
tion procedure/Lift test" = YES, the program will
automatically open the "Lift Check" page, see
"Lift and Sensor Check" section.
(2) Work start selection (fig.33)
To access this function from the rest of the
program select the
Select the wheel alignment mode
procedure and start work
restarts the previous job.
and
"demo" mode, for which the sensors are not
required. The "demo" mode is indicated by the
symbol in the status bar.
and
maintenance utilities, and wheel aligner cus-
tomisation.
ends execution of the program, shuts
down all the applications open and switches off
the wheel aligner.
allows selection of the wheel alignment
modes. The truck and trailer modes are only
enabled if the
been installed. The instructions for this mode
are provided in the manual supplied with the kit.
WARNING
before switching off the wheel aligner, always
shut down the active programs and operating
system correctly.
(3) Databank (fig.34)
To access this function from the rest of the
program select the
Select the vehicle from the databank, using the
keys in the following way:↓, ↑, PAGE Down, PAGE
Up, ←, → and the letter keys to scroll through
Operator's Manual EXACT 70 II
icon or the F9 key.
and
.
enable and disable the
access the service and
truck upgrade has
icon or the F8 key.
the makes and model descriptions;
↵ to confirm the vehicle selection.
During selection, the vehicle code is shown in
the status bar.
The model of the vehicle selected will be loaded
in the "Vehicle name bar", which contains the name
of the market set while selection is in progress. In
"car" alignment mode, the screen shows all the
cars and vans up to and including 3500kg; in "truck"
alignment mode, it displays all the trucks and vans
up to and including 3500kg.
recalls the market selection. The screen
only shows the vehicles on sale on the selected
market. allows selection of the reference
databank. The vehicles belonging to the user
databank are marked by the
displays the vehicle descriptions sup-
plied by the manufacturers for wheel alignment
operations.
displays the commercial descriptions
of the vehicles.
accesses compilation of the job record.
If the user set-up field "Alignment procedure
customisation / vehicle selection mode" = "Job
record" the data input form will be displayed.
Selection of the vehicle from the databank can
be selected from the record.
Different job record options are available in the
set-up, "Job record / type" field.
Key to Databank abbreviations
/ Separates different models
4WD - 4x4 Four Wheel Drive
4WS Four wheel steering
ALU Lightweight alloy wheels
DR Door
CAB Enclosed light commercial ve-
hicle
CABR. Convertible
ESTATE - SW Estate Version (Station Wagon)
HD Heavy Duty or all-terrain
S Special or Sport
PAS Power Assisted Steering
LHD Left Hand Drive
RHD Right hand drive
symbol.
EN
69