Databank Management - Corghi EXACT 70 II Manuel D'utilisation

Backup procedure:
In the window shown in fig.54, select the icon DATA
SAVING. The page shown in fig.55 will open, and
here it is possible to set:
• the path for saving (HARD DISK, REMOVABLE
SUPPORTS, etc.)
• the frequency of the autosaves
• confirmation of the user before carrying out
the autosaves
• saving in compressed format.
Press Continue in order to proceed. The save will
be indicated as in fig.56.
The program returns to the page shown in fig.54.
Click on the icon
LOGO page.
Restore procedure:
In the window shown in fig.54, select the icon
DATA RESTORE. The page shown in fig.58 will
open, and here it is possible to select the path
leading to the data to be restored.
Once the correct path has been selected, the data
regarding the save are shown in the lines below.
Press Continue in order to proceed. The indication
of fig.59 will appear.
Press Continue to proceed with the restore, or
Cancel to cancel the operation.
Once the restore is completed, the indication of
fig.60 will appear, informing you to restart the align-
ment program in order to register the data restore.
The program returns to the page shown in fig.54.
Click on the icon
LOGO page.
DATABANK
MANAGEMENT
Database management functions
To access the databank management tools,
from the main menu page select the
and icons. When prompted, type the
password; the aligner leaves the factory with the
password "databank".
To move around the records, use the keys as
follows:
Operator's Manual EXACT 70 II
←, → to scroll through the fields and confirm
the insertion;
←, → in the INS function (obtained by pressing
the Insert key and highlighted in the status bar
by the symbol
individual characters of the field.
↵ to confirm the entries;
↑, ↓ to access the choice list in the COMBO boxes
(boxes identified by the symbol
you to select a value from those already filed) and
↵ to confirm the choice.
ESC to abort the last selection or move the cursor
along the icon bar.
↵ to memorise the card and proceed.
to go back to the
To access select the
Position the cursor on the job you want, and
select it with ↵ to visualise the content.
tion number, operator or order
to go back to the
been applied, deletes the selected jobs only.
the option must be enabled in the set-up.
To access select the
Position the cursor on the card of the customer
you want, and select it with ↵ to visualise and/
or modify the content.
) to scroll through the
Job record selection
,
icons.
to sort jobs by date, customer, registra-
to select jobs using search parameters.
deletes the job selected by the cursor.
deletes all jobs. If a sorting criterion has
allows modification of the working data,
Customer records
,
icons.
printout of the addresses of the custom-
and allowing
and
EN
and
79