Set-Up; User Set-Up - Corghi EXACT 70 II Manuel D'utilisation

SET-UP

User set-up

To access the user set-up, select the
icons from the main menu.
From the user set-up, you can customise the
alignment procedure to adapt it to your own
requirements.
The alignment procedure customisation settings
are contained in folders (shown in fig.44); each
folder contains similar customisation settings.
The different options available are provided
for each setting.
Move within the set-up windows using the keys ↑,
↓, PAGE Up, PAGE Down, ←, → and ↵ to confirm
the option selected. The ESC key aborts the
selection just made.
The option currently saved is highlighted in blue.
An option not active, because the aligner version
does not allow its use or other selections prevent
it from being used, is transparent.
Exit the set-up function by selecting the
icon and save the options set by selecting the
icon in the information window.
The , and
you to change the set-up settings quickly by
recalling pre-set configurations.
Customisation
➥ Working language
Selection of the language to be used in the
working procedure, from those available in
the list.
➥ Printed report language
Selection of the language to be used in the
printout of the reports of the jobs done, from
those available in the list.
➥ Logo
Selection of the logo for display in the "Main
Menu" step and in the screen saver (see
"Logo" section).
➥ Customisation
Input of the main heading to be displayed in
the "Main Menu" step.
Operator's Manual EXACT 70 II
➥ Secondary logo
Selection of the logo for display in the "Main
Menu" step and in the screen saver (see
"Logo" section).
➥ Secondary customisation
and
Input of the secondary heading to be dis-
played in the "Main Menu" step.
➥ Alternation of customisation
YES: In the "Main Menu" step the main and
secondary logo and customisation are dis-
played in alternation.
No: In the "Main Menu" step only the main
logo and customisation are displayed.
➥ Advertising message
Input of the advertising message (see "Cus-
tomisation" section).
➥ Date format
European: European date format day/month/
year.
American: American date format month/day/
year.
Units of measurement
➥ Toe
Degrees: Unit of measurement for selection
in the "Angles" setting.
Length: Unit of measurement for selection in
the "Length" setting.
ø 28.65": Measurement of toe values with
fixed rim diameter. Unit of measurement for
selection in the "Length" setting.
icons allow
➥ Setback and track difference
Degrees: Unit of measurement for selection
in the "Angles" setting.
Length: Unit of measurement for selection in
the "Length" setting.
➥ Length
Mm: millimetres
In: inches (in / ")
➥ Angles
1/100: grades
1/60: degrees
➥ Pressure
bar
psi
➥ Weight
Kg: kilograms
Lb: pounds
➥ Mileage/kilometres on the clock
Km: kilometres
EN
65