Angelo Po AT 61E Manuel D'utilisation page 84

Alarm Fault
Electrical component com-
E10
partment has overheated.
E11
Electronic circuit board diag-
E13
nostics tripped.
E14
E15 ROI pre-fi lter expired.
E16 Osmosis membrane expired.
The humidity probe has failed
E19
or is not properly connected.
E20 Setup error.
The washing cycle has been
E21 interrupted because there is
no cleaner.
The washing cycle has been
E22 interrupted because there is
no descaling cleaner.
The washing cycle has been in-
E23 terrupted during the fi nal sani-
tization stage
E24 Automatic cleaning system
E26 failure.
GB
System fi lling procedure not
E25
completed.
Core probe not inserted in the
E29
food.
E30 Faulty panel board.
E32 Faulty drain valve.
There is no drain water, or
E33 there is insuffi cient water pres-
sure during washing.
E34 Washing error.
3378702_ATE_ut_GB
Remedy
The oven solves the problem
on its own.
Inform the after-sales service.
Replace the ROI pre-fi lter as
soon as possible.
Replace the ROI osmosis mem-
brane as soon as possible.
Inform the after-sales service
Inform the after-sales service
Check the pipe position and
the level of cleaner in the tank;
top up if necessary and restart
the washing cycle.
Check the pipe position and
the level of descaling cleaner
in the tank; top up if necessary
and restart the washing cycle.
Press the reset button and
rinse the cooking chamber
thoroughly by hand
Check that no residues of
cleaning products have been
left inside the cooking cham-
ber.
Check the position of the pipe-
and the level of the descaling
inthe container; if necessary,
topit up and re-launch the au-
tomatic cleaning cycle.
Insert the core probe.
Inform the after-sales service
Inform the after-sales service
Inform the after-sales service
Inform the after-sales service
- 38 -
Notes
The oven's functions are ena-
bled so cooking cycles can be
carried out.
The oven's functions are disa-
bled so no cooking cycles can
be carried out.
The oven's functions are ena-
bled so cooking cycles can be
carried out.
The oven's functions are ena-
bled so cooking cycles can be
carried out.
The oven's functions are ena-
bled so cooking cycles can be
carried out.
The oven's functions are disa-
bled so no cooking cycles can
be carried out.
If the problem persists, call the
after-sales service.
If the problem persists, call the
after-sales service.
If the problem persists, call the
after-sales service.
If the problem persists, call the
after-sales service.
The oven's functions are ena-
bled so cooking cycles can be
carried out.
If the problem persists, call the
after-sales service.
The oven's functions are ena-
bled so cooking cycles can be
carried out.
The oven's functions are disa-
bled so no cooking cycles can
be carried out
The oven's functions are disa-
bled so no cooking cycles can
be carried out
The oven's functions are disa-
bled so no cooking cycles can
be carried out
The oven's functions are disa-
bled so no cooking cycles can
be carried out
ENGLISH