Lengthy Downtimes Of Appliance; Servicing; Instructions And Warnings For Servicing - Angelo Po AT 61E Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

LENGTHY DOWNTIMES OF APPLIANCE

If the appliance is to be out of use for a lengthy period, proceed as follows.
1) Cut off the mains electricity supply using the appliance's master switch.
2) Turn off the water supply tap.
3) Clean the appliance and the surrounding areas thoroughly.
4) Spread a fi lm of edible oil over the stainless steel surfaces.
5) Carry out all the servicing procedures.
6) Cover the appliance and leave a few gaps to allow air to circulate.

INSTRUCTIONS AND WARNINGS FOR SERVICING

Keep the appliance at peak effi ciency by carrying out the scheduled servicing procedures re-
commended by the manufacturer. Proper servicing will allow the best performance, a longer
working life and constant maintenance of safety requirements.
Caution - Warning
All maintenance work that requires precise, technical expertise or particular skills or quali-
fi cations for legal reasons,should be carried out by suitably trained and/or qualifi ed staff
and in any case with recognised experienced gained in the specifi c fi eld of intervention.
In particular, turn off the water supply tap, cut off the electricity supply using the master
switch and prevent access to all devices that might cause unexpected health and safety
hazards if turned on.
At the end of each session of use and whenever necessary, clean:
– The condensation collection tank (see pag. 35);
– The cooking chamber (see pag. 34
– Check the air fi lter located under the appliance and clean it if it is dirty or obstructed ( see
pag. 35).
– Clean the appliance and the surrounding environment (see page 33).
Caution - Warning
At least once every 6 months or, if meat or greasy foods are cooked frequently, every 2
months clean the vent (see page 35) .
Every year, have skilled, authorised personnel carry out the following operations:
– A check on the effi ciency of the fl ues and air intakes, cleaning them if necessary.
– General check of the appliance.
– Identify and change worn parts.
Important
Record the yearly inspections.
3378702_ATE_ut_GB

SERVICING

- 31 -
GB
ENGLISH

Publicité

Table des Matières

Dépannage

loading

Table des Matières