Handling And Installation; Instructions And Warnings For Handling And Installation; Packaging And Unpacking; Transport - Angelo Po AT 61E Manuel D'utilisation

INSTRUCTIONS AND WARNINGS FOR HANDLING AND INSTALLATION

Important
When handling and installing the appliance comply with the information provided by the
manufacturer directly on the packaging, on the appliance and in the instructions for use.
All handling and installation operations should be carried out in accordance with current
legislation on health and safety at work.

PACKAGING AND UNPACKING

The packaging is designed to reduce space and as ap-
propriate to the type of transport used.
To simplify transport, some components may be re-
moved and suitably protected and packed for trans-
port.
The packaging carries all information necessary for
loading and unloading.
When unpacking, check that all components are pre-
sent in the correct quantities and are undamaged.
The packaging material must be properly disposed of
in accordance with legal requirements.

TRANSPORT

Diff erent means of transport may be used, depend-
ing partly on the destination.
The chart shows the most commonly used alterna-
tives.
During transport, fi x the packaging to the means of
transport securely to prevent undesirable shifting.

HANDLING AND LIFTING

The appliance can be handled using fork-lift or hook
equipment of suitable load-carrying capacity. Before
lifting, check the position of the load's centre of grav-
ity.
Important
When engaging with the lifting equipment, watch
out for the intake and outlet pipes.
3378702_ATE_inst_GB

HANDLING AND INSTALLATION

- 5 -
Lifting equipment
means of transport
GB
ENGLISH