Replacing The Fuse; Changing The Lamp - Angelo Po AT 61E Manuel D'utilisation

REPLACING THE FUSE

To carry out this operation, proceed as follows.
1) Undo the screws to remove the side panel (A).
2) Open the fuse-holder (B) and replace the damaged fuse (C).
3) Replace the fuse-holder and the side panel when the operation is complete.

CHANGING THE LAMP

To carry out this operation, proceed as follows.
1) Loosen the screws of the lamp cover (A).
2) Remove the side panel (B).
3) Unscrew the screws to remove the lamp holder (C).
4) Extract and replace the lamp (D).
Caution - Warning
During the procedure, take care not to touch the
lamp directly; wear protective gloves if necessary.
5) Reassemble everything when the operation is com-
plete.
3378702_ATE_inst_GB
C
B
A
A
- 13 -
B
C D
GB
ENGLISH