Use And Operation; Instructions And Warnings For Use; Description Of Controls - Angelo Po AT 61E Manuel D'utilisation

Table des Matières

Les langues disponibles

INSTRUCTIONS AND WARNINGS FOR USE

Important

Besides being authorised and appropriately documented,and if necessary,instructed and

trained, users,on fi rst usage, have to simulate several operations to identify the controls

and main functions.

Use only as intended by the manufacturer and do not tamper with any devices to obtain

operations other than those intended.

Before use, check that the safety devices are properly installed and in good working order.

As well as undertaking to comply with these requirements, users must apply all safety

regulations and read the description of the controls and the start-up instructions carefully.

Immediately report any anomaly or deterioration of the components and/or parts of the

unit and if necessary ask qualifi ed staff to intervene for the inspection and/or replacement

activities.

– The manufacturer recommends using the oven above 250°C only when strictly necessary

and for short periods of time, not to reduce the life of your equipment.

DESCRIPTION OF CONTROLS

The illustration shows the appliance's control panels,

while the list details the descriptions and functions of

the individual controls.

A) Touch screen display: it displays the work param-

eters and the alarm codes and is used to select the

relative function or to change the values.

B) Knob: Used to select the function required or mod-

ify values.

– Clockwise: scrolls the zones "downwards or to

the right" or increases the highlighted value.

– Anticlockwise: scrolls the zones "upwards or to

the left" or decreases the highlighted value.

After selecting the function required or the value,

press the knob to confi rm and save the function or

value.

C) On/off button: turns the appliance's electricity

supply on and off (in models AT201 and AT202 the

power button is located on the left hand side of the

control panel).

D) USB port: used to connect a remote data storage

unit to the appliance.

E) Connector for optional probe or vacuum probe

(accessory on request).

F) Loudspeaker: reproduces the sound signals.

3378702_ATE_ut_GB