Testing Of The Appliance; Adjustments; Instructions And Warnings For Adjustments; Replacing Parts - Angelo Po AT 61E Manuel D'utilisation

TESTING OF THE APPLIANCE

Important
Before it is put into service, the system must be tested to check the operating conditions of
every single component and identify any malfunctions.
In this stage, it is important to check that all health and safety requirements have been
complied with in full.
To test the system, make the following checks.
1) Turn on the water supply taps and check that the connections are tight.
2) Turn on the master switch to check the electrical connection.
3) Make sure that the mains voltage is the same as that of the appliance and, if necessary, carry
out the conversion (see page 11).
4) Check that the safety device is operating correctly.
5) Carry out a cooking cycle without food to ensure that the appliance is operating correctly.
After testing, if necessary instruct the user in all the skills necessary for putting the appliance into
operation in conditions of safety, in accordance with legal requirements.

INSTRUCTIONS AND WARNINGS FOR ADJUSTMENTS

The appliance's main functions do not require any special adjustments by specialist staff except
the settings made during use by the user.

INSTRUCTIONS AND WARNINGS FOR REPLACING PARTS

GB
Important
Before carrying out any replacement procedure, activate all the safety devices provided
and decide whether staff at work and those in the vicinity should be informed.
In particular, turn off the water supply taps, cut off the electricity supply to the appliance
using the master switch and prevent access to all devices which might cause unexpected
health and safety hazards if turned on.
If worn parts have to be replaced, use original spare parts only.
The manufacturer declines all responsibly for injury or damage to components due to
the use of non original parts, or extraordinary work on the appliance which may modify
the safety requirements without the manufacturer's authorisation.When ordering
components, follow the instructions provided in the parts catalogue.
Caution - Warning
Replacement operations must be carried out by authorised, qualifi ed staff , in accordance
with the relevant legal requirements.
3378702_ATE_inst_GB

ADJUSTMENTS

REPLACING PARTS

- 12 - ENGLISH