Network Information" Function - Sygonix SY-4548736 Notice D'emploi

c) "Network information" function
This function shows the current network settings of the monitor/DVR.
Proceed as follows:
• Briefly press the "MENU" button (3, 31) on the monitor/DVR or the IR remote control to display the main menu.
• Use the " " or " " button to select the "System Info" submenu and briefly press the "
• Use the " " or "
(6, 34). The network information of the monitor/DVR is displayed.
• To go back one menu level or to exit the OSD menu, briefly press the "MENU" button (3, 31) on the monitor/DVR or
the IR remote control (multiple button pressed may be needed).
" button to select the "Network information" function and then briefly press the "
" button (6, 34).
" button
65