Recording With Motion Detection; Menu Functions; Call Up/Exit The Menu; Selecting Function - Sygonix 2300294 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

e) Recording with motion detection
You can activate or deactivate the recording function with the "ESC" button (18) on the IR remote control (or with the
"
" button (4) on the monitor) if automatic motion detection is enabled in the video menu (see section 11).
When the recording function is activated, a "red-eye" symbol (
Automatic motion detection only works on channel 2. If a change is detected in the video image of
channel 2, the recording of channel 1+2 starts automatically (recording duration can be set in the menu).
Note that the motion detection is based on changes in the image content, but not on the IR sensor.

11. Menu functions

a) Call up/exit the menu
• Before calling up the menu, be sure to end a running recording; see section 10. c).
• To call up or exit the menu, press the "MENU" button (3, 17). You can also use the "ESC" button (18) to exit the
menu.
b) Selecting function
• After calling up the menu, you can select the functions using the "
• Press the "
" button (6, 19) to confirm your selection.
c) Submenu "Display"
This submenu enables to change brightness, contrast, colour saturation and colour temperature of the LC display.
In addition, the display can be mirrored horizontally/vertically, the sleep mode (automatic power-off of the LC display
after a certain time) can be activated and the date/time display can be enabled/disabled.
• Select the desired setting with the "
• The respective setting can be changed with the "
(6, 19).
• Use the "MENU" button (3, 17) or the "ESC" button (18) to return to the previous menu.
d) Submenu "Language"
• Select the desired display text language with the "
• Use the "MENU" button (3, 17) or the "ESC" button (18) to return to the previous menu.
" or "
" button and confirm the selection with the "
" or "
" button and confirmed as usual with the "
" or "
" button and confirm the selection with the "
) appears on the display.
" or "
" button.
" button.
" button
" button.
37

Publicité

Table des Matières
loading

Table des Matières