Operation Of The Osd Menu - Sygonix SY-4548736 Notice D'emploi

11. Operation of the OSD menu

In this menu you can use the buttons on the monitor/DVR or the IR remote control.
• Briefly press the "MENU" button (3, 31). The main menu is then displayed.
• Briefly press the "
- Camera settings
- System settings
- System Info
- Playback
- Recording settings
• Use the " " button (6, 34) to confirm a submenu selection.
• Use the arrow buttons "
• The setting must be confirmed with the "
• To go back one level in the menu or to completely exit the OSD menu, briefly press the "MENU" button (3, 31). If
the monitor/DVR is in a submenu, multiple button presses may be needed.
56
" or " " button to select the available submenus in OSD menu:
" / " " or " " / " " to change settings or values depending on the submenu.
" button (6, 34) depending on the function/menu.