Time Schedule" Function - Sygonix SY-4548736 Notice D'emploi

b) "Time schedule" function
The monitor/DVR can record automatically at a certain time or only on certain weekdays, for example, on Tuesday
from 06:00 AM to 12:00 PM and from 6:00 PM to 9:00 PM. Each wireless camera offers several time periods per day
as well as different settings.
Proceed as follows:
• Briefly press the "MENU" button (3, 31) on the monitor/DVR or the IR remote control to display the main menu.
• Use the " " or " " button to select the "Recording settings" submenu and briefly press the "
• Use the " " or " " button to select the "Time schedule" function and then briefly press the "
• Use the " " or " " button to display the existing recording periods for the 7 days of the week.
• If you want to set or change the recording periods, press the "
colour. Then briefly press the "
• Use the " " or " " button to select the desired wireless camera ("Camera 1", "Camera 2", "Camera 3" or "Cam-
era 4") and then briefly press the "
You can also select two or more wireless cameras. In this case, the following programming of the recording
periods applies to all selected wireless cameras at the same time. This avoids time-consuming program-
ming of each individual camera.
• Use the " " or " " button to set the start and end time and the days of the week.
• Set the desired start and end time of recording using the "
For a quick adjustment, press and hold down the corresponding button for a bit.
• Check the desired weekday by first selecting the weekday with the "
" " button (6, 34). The selected weekday is highlighted in colour.
You can also select two or more weekdays. In this case, the programming of the recording periods applies
to all selected weekdays at the same time.
• To save the recording period setting, use the "
the " " button (6, 34).
• To delete the recording period, use the "
" " button (6, 34).
• To go back one menu level or to exit the OSD menu, briefly press the "MENU" button (3, 31) on the monitor/DVR or
the IR remote control (multiple button pressed may be needed).
If you want to programme two time periods per day (e.g. 6:00 AM - 10:00 AM and 6:00 PM - 10:00 PM), first
programme the period 6:00 AM - 10:00 AM as described above. Then restart the programming process and
set the period from 6:00 PM to 10:00 PM.
68
" button (6, 34).
" button (6, 34). The selected wireless camera is highlighted in colour.
" or " " button to select the "Set" function and then briefly press
" or " " button to select the "Delete" function and then briefly press the
" or " " button so that "Change" is highlighted in
" or " " button.
" or " " button and then briefly pressing the
" button (6, 34).
" button (6, 34).