Camera Resolution" Function - Sygonix SY-4548736 Notice D'emploi

Proceed as follows:
• Briefly press the "MENU" button (3, 31) on the monitor/DVR or the IR remote control to display the main menu.
• Use the " " or " " button to select the "Camera settings" submenu and briefly press the "
• Use the " " or " " button to select the "Camera on/off" function and then briefly press the "
• You can now use the "
or "Camera 4").
• Switch the channel on or off using the "
• Confirm the setting by briefly pressing the "
The monitor/DVR then switches back to the previous menu. If another unused channel needs to be
switched off, proceed as described above.
• To go back one menu level or to exit the OSD menu, briefly press the "MENU" button (3, 31) on the monitor/DVR or
the IR remote control (multiple button pressed may be needed).
c) "Camera resolution" function
This function is used to set the resolution for the video recordings to be saved on the memory card. You can choose
between "VGA" (640x480) and "HD" (1280 x 720).
Proceed as follows:
• Briefly press the "MENU" button (3, 31) on the monitor/DVR or the IR remote control to display the main menu.
• Use the " " or " " button to select the "Camera settings" submenu and briefly press the "
• Use the " " or " " button to select the "Resolution" function and then briefly press the "
• You can now use the "
or "Camera 4").
• Select the desired resolution for the video recording using the "
"VGA" = 640x480 resolution
"HD" = 1280x720 resolution
VGA offers recordings with 30 frames per second, whereas HD offers only up to 20 frames per second. In
addition, the HD resolution requires more memory and thus reduces the maximum recording time.
• Confirm the setting by briefly pressing the "
The monitor/DVR then switches back to the previous menu. If you want to set resolution for another chan-
nel, proceed as described above.
• To go back one menu level or to exit the OSD menu, briefly press the "MENU" button (3, 31) on the monitor/DVR or
the IR remote control (multiple button pressed may be needed).
58
" or " " button to select one of the four channels ("Camera 1", "Camera 2", "Camera 3"
" or "
" button (6, 34).
" or " " button to select one of the four channels ("Camera 1", "Camera 2", "Camera 3"
" button (6, 34).
" button.
" or "
" button (6, 34).
" button (6, 34).
" button (6, 34).
" button.
" button (6, 34).