Sd Card Information" Function; Version Information" Function - Sygonix SY-4548736 Notice D'emploi

14. "System Info" submenu
a) "SD card information" function
Here you can view information about the inserted memory card (total memory, used memory and remaining memory).
Proceed as follows:
• Briefly press the "MENU" button (3, 31) on the monitor/DVR or the IR remote control to display the main menu.
• Use the " " or " " button to select the "System Info" submenu and then briefly press the "
• Use the " " or "
(6, 34).
• The following information about the inserted memory card is now displayed:
- "Total memory": Total size of the memory card
- "Used memory": Occupied memory (percentage)
- "Remaining memory": Available memory (percentage)
There are two memory display options: "MB" and "GB".
Originally 1 KB is exactly 1024 bytes (binary = 2^10). 1 MB is therefore 1024*1024=1048576 bytes (binary
= 2^20) etc.
For convenience, manufacturers of hard drives, USB sticks or memory cards now assume 1 KB
= 1000 bytes, just like 1 kilometre has exactly 1000 metres. 1 MB is therefore "only" 1 million bytes =
1000000 bytes.
However, the monitor/DVR assumes the exact specification (1 KB = 1024 bytes). A 4 GB SDHC memory
card is therefore displayed as 3814 MB (and not as 4000 MB).
• To go back one menu level or to exit the OSD menu, briefly press the "MENU" button (3, 31) on the monitor/DVR or
the IR remote control (multiple button pressed may be needed).
b) "Version information" function
This function shows the firmware version of the monitor/DVR.
Proceed as follows:
• Briefly press the "MENU" button (3, 31) on the monitor/DVR or the IR remote control to display the main menu.
• Use the " " or " " button to select the "System Info" submenu and briefly press the "
• Use the " " or "
(6, 34). The firmware version of the monitor/DVR is displayed.
• To go back one menu level or to exit the OSD menu, briefly press the "MENU" button (3, 31) on the monitor/DVR or
the IR remote control (multiple button pressed may be needed).
64
" button to select the "SD card information" function and then briefly press the "
" button to select the "Version information" function and then briefly press the "
" button (6, 34).
" button
" button (6, 34).
" button