Methods And Precautions For Disposal; Technical Data - Mectron MICROPIEZO Mode D'emploi Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

METHODS AND PRECAUTIONS FOR DISPOSAL

10
METHODS AND PRECAUTIONS FOR
DISPOSAL
WARNING: Hospital waste.
Treat the following objects as hospital waste:
• Inserts, when worn or broken;
• Inserts tightening wrench, when worn or
broken.
Disposable materials and materials that carry
biological risk must be disposed of according
to local regulations in force regarding
hospital waste.
WARNING: When handling the inserts,
pay particular attention to the sharp, pointed,
irregular parts to avoid any wounds or
injuries.
11
TECHNICAL DATA
Device compliant with Regulation (EU)
2017/745
Classification under the IEC/EN 60601-1
Essential performance
Appliance for intermittent operation
Power Supply
Max. current
Battery
Working Frequency
Powers type
MICROPIEZO must be disposed of and treated
as waste subject to separate collection.
NOTE: MICROPIEZO packaging is made
from 100% recyclable materials that are
easy to sort. Specifically: Paper (PAP) and
Polyethylene (PE).
Failure to comply with the previous points can
result in a penalty pursuant to the directive
on waste electrical and electronic equipment
(WEEE).
The buyer has the faculty to deliver the device
to dispose of to the retailer who supplies
the new equipment; instructions for proper
disposal are available at MECTRON.
Class lla
II
Parts applied: type B (insert)
IP 20 (appliance)
IP 22 (pedal model FS-11 or FS-05)
According to the standard IEC 80601-2-60
the device has no essential performance
55 sec. ON - 30 sec. OFF with irrigation
30 sec. ON - 120 sec. OFF without irrigation
100-240 V~ 50/60 Hz
1,5A ( 24V)
The device is equipped with a backup
battery, which can only be replaced by an
Authorised MECTRON Service Centre.
Model: BR/CR 1220
Automatic Scan
From 24 KHz to 36 KHz
endo
perio-scaling
prosthetics
soft-mode
61

Publicité

Table des Matières
loading

Table des Matières