Mectron MICROPIEZO Mode D'emploi Et D'entretien page 126

MICROPIEZO
To start the LONG
FLUSH
pedal and release wile the
flashes;
The cycle can be stopped at any time
by pressing again the button
alternatively, when the pedal is pressed
again.
The keyboard will be active again by
returning the last configuration used.
The system will activate the water pump
with flow rate 6 for 20 seconds.
The numbers on the water scale
and those on the power scale will
progressively turn off in succession
indicating the progress of the procedure:
first the numbers from 6 to 0 on the
water scale, and then the values from
prosthetics to 0 on the power scale.
The button will remain lit for the
FLUSH
whole duration of the procedure (20
seconds).
Once the cycle is complete, the
keyboard will be active by setting the
last configuration used.
After cleaning the irrigation circuit, disassemble the individual parts (see
33 ) and proceed to clean and sterilise them (see
32
4
cycle press the
,
button
FLUSH
or,
FLUSH
5
Chapter 8 on page 35
1 2
Chapter 7 on page
).