Cleaning The Sterilisable Accessories; Manual Cleaning; Required Materials - Mectron MICROPIEZO Mode D'emploi Et D'entretien

8.5 Cleaning the Sterilisable Accessories
The sterilisable parts of the appliance are:
• Scaler handpiece;
• Scaler nose cone;
• Inserts;
• Inserts tightening wrench.
Before proceeding with operations to check
cleanliness ( Chapter 8.6 on page 55
and lubrication ( Chapter 8.7 on page 56
and then sterilisation (
57 ), one of the three possible cleaning
methods explained in detail in the following
sub-chapters must be selected.
8.5.1 Manual Cleaning
Manual cleaning can be carried out as an alternative to the automatic cleaning as described in
Chapter 8.5.2 on page 53.
8.5.1.1 Required Materials
• Enzymatic detergent at pH 6-9;
• Water;
• Container for immersion in the
enzymatic liquid;
• Ultrasonic tank;
Prepare a solution of enzymatic detergent
with pH 6-9, according to the instructions
of the manufacturer;
CAUTION: Once used, dispose of the
enzymatic detergent correctly, do not
recycle it.
a) Process validated by independent bodies with
Mectron ENZYMEC enzymatic detergent, 0.8%
v/v.
CLEANING AND STERILISATION
), drying
)
Chapter 8.8 on page
a)
CAUTION: The following instructions
have been validated by MECTRON in order
to enable the medical device to be reused.
The person responsible for the maintenance,
cleaning and sterilisation process, must
ensure the that repeated processes are
effectively carried out using the equipment,
materials and staff in the reprocessing
structure, in order to achieve the desired
result. This generally requires the validation
and systematic monitoring of the process.
Similarly, all deviations from the instructions
provided by the person responsible for the
processes should be properly evaluated for
judging the effectiveness and the potential
undesirable consequences.
• Clean, soft, low-lint cloths;
• Brush with soft nylon bristles;
• Syringe;
• Demineralised water.
1
45