Maintenance; Disposal Modes And Precautions - Mectron Piezosurgery WHITE Mode D'emploi Et Maintenance

06

MAINTENANCE

If the device is not used for prolonged time,
observe the following recommendations:
1 Disconnect the device from the electrical
network;
2 If the period of disuse is prolonged, put
the device back in its original package and
store it in a safe place;
3 Prior to using the device again, clean and
sterilize the handpiece, the inserts, the
wrench, the tubes, and the connectors,
07

DISPOSAL MODES AND PRECAUTIONS

WARNING: Hospital wastes.
Hospital wastes. Treat the following items
as hospital waste:
- Inserts: when they are worn out or
broken;
- Flow adjuster: at the end of each
intervention;
- Peristaltic pump tube: after 8 sterilization
cycles;
- Torque wrench for inserts: when worn
out or broken.
The use and throw-away materials and
materials that entail a biological risk must be
disposed of in accordance to the norms in
force locally concerning hospital wastes.
06 MAINTENANCE
following the instructions provided in the
Cleaning and Sterilization Manual;
4 Check that the inserts are not worn out,
deformed, or broken, placing special
attention to the integrity of their tip.
WARNING: Periodically check that
the electrical power cable is intact; if it
is damaged, replace it with an original
Mectron spare part.
PIEZOSURGERY white must be disposed of
®
and treated as a waste for separate collection.
Disregard of the previous points may entail a
It is up to the purchaser to hand over
the device for its disposal to the retailer
who supplies him new equipment; the
instructions for proper disposal are available
from Mectron.
EN
23