Mectron MICROPIEZO Mode D'emploi Et D'entretien page 154

MICROPIEZO
Slightly rotate the peristaltic pump
clockwise and remove it from its
housing;
Insert the new peristaltic pump and
make sure that the pin of the impeller
and the clip (upper and lower) coincide
with the respective seats. Press up to the
complete insertion of the clips. Insert the
water conduits in the relative sleeves for
the whole length of the latter;
Refit the plastic cover which covers
the housing of the peristaltic pump by
inserting it from the top and slide it onto
the side guides until complete insertion.
60
3
4
5