Mectron MICROPIEZO Mode D'emploi Et D'entretien page 136

MICROPIEZO
To start the LONG
FLUSH
pedal and release wile the
flashes;
The cycle can be stopped at any time
by pressing again the button
alternatively, when the pedal is pressed
again.
The keyboard will be active again by
returning the last configuration used.
The system will activate the water pump
with flow rate 6 for 20 seconds.
The numbers on the water scale
and those on the power scale will
progressively turn off in succession
indicating the progress of the procedure:
first the numbers from 6 to 0 on the
water scale, and then the values from
prosthetics to 0 on the power scale.
The button will remain lit for the
FLUSH
whole duration of the procedure (20
seconds).
Once the cycle is complete, the
keyboard will be active by setting the
last configuration used.
Repeat the LONG
FLUSH
7 to 9 of the procedure) a second time;
At the end of the LONG
wait 12 minutes;
Repeat the LONG
FLUSH
7 to 9 of the procedure) 3 times;
42
8
cycle press the
,
button
FLUSH
or,
FLUSH
9
10
cycle (see points
11
cycles,
FLUSH
12
cycle (see points
1 2