Electric Chain Hoist (Er2) Periodic Inspection; Top Hook, Bottom Hook; Number Of Start; Peripheral Parts Of The Body Size - KITO ER2 Serie Manuel Du Propriétaire

Chapter 2 Inspection
Periodic Inspection (continued)

■ Electric Chain Hoist (ER2) Periodic Inspection

■ Top Hook, Bottom Hook

Item
Number of
start

■ Peripheral parts of the Body size

Item
2
Chain
Guide A
76
Check method
• Check the number of start
with the CH Meter.
Check method
• Check visually.

Chain Guide A

Criteria
• Number of start must not exceed the guidelines for
replacement. (Refer to P92)
Criteria
• To have no apparent abrasion, deformation
and damage
• To have no flaw due to hitting by the Load
Chain
CAUTION
• The flaw due to hitting is caused
by wrong use such as lifting a
load in an inclined direction. If
the abrasion is observed on the
Mandatory
Chain Guide, the Load Chain
may be worn also. Refer to the
item of Load Chain Abrasion and
check the abrasion.
Neglecting the check of the
Load Chain abrasion may result
in bodily injur y or proper ty
damage.
When failed
Replace the Top Hook
and Bottom Hook.
When failed
Replace the Chain
Guide A.