KITO ER2 Serie Manuel Du Propriétaire page 47

■Combination with the Manual Trolley
■Parts replacement of the Electric Chain Hoist
Remove the Top Hook and replace it with a Connection
Yoke.
Replacing the Top Hook of Body size ER2-B/C/D/E
●
1) Remove the Shaft Retainer Clip using
plier.
2) Remove Socket Bolt from the Shaft
Retainer, and remove the Shaft Retainer.
3) Remove two Connection Shafts.
4) Remove the Top Hook and replace it
with the Connection Yoke.
5) Insert two Connection Shafts into the
hole of the Body size.
6) Mount the Shaft Retainer with Socket
Bolt.
Replacing the Top Hook of Body size ER2-F
●
1) Remove four Socket Bolts and remove
the Controller Cover.
2) Remove pan head screws of the
Connection Shaft and the Fixing Shaft
(two screws each), and remove the Shaft
Retainer.
3) Pinch the respective upper ends of the
Connection Shaft and the Fixing Shaft
and pull out them.
4) Remove the Top Hook and replace it with the
Suspender T.
5) Insert the Connection Shaft and Fixing
Shaft into the mounting hole.
6) Fix the Shaft Retainer of the Connection
Shaft and the Fixing Shaft with pan head
screws (two screws each).
7) Mount the Controller Cover with four
pan head screws.
Manual Trolley For Double Chain Type
Connection Yoke
Shaft Retainer
Clip
Manual Trolley For Double Chain Type
Connection Yoke
Bracing Shaft
O ring
Shaft Retainer
Pan head screw
Shaft Retainer
Pan head screw
Controller Cover
Socket Bolt
Top Hook
Connection
Shaft
Shaft
Retainer
Socket Bolt
Top Hook
Connection
Shaft
Panel
O ring
(to be continued)
1 1
47