KITO ER2 Serie Manuel Du Propriétaire page 146

Appendix
Check Sheet for ER2 Series Electric Chain Hoist Periodic Inspection (continued)
Electric Chain Hoist
Motorized Trolley
Geared Trolley
Plain Trolley
■ Motorized Trolley MR2 Periodic Inspection
■Check result : ○ Good, △ To be replaced (adjusted) next inspection, × Bad, Needs replacement (adjustment)
Category Check item
Daily inspection
Frequent inspection
Appearance
Brake Pad
Wheel
Side roller
A
Lifting shaft
Suspender
Gear frame packing
Gears, motor shaft
Rail surface
Deformation, abrasion
Rail fixing bolt
Stopper
Appearance
Refer to check table of electric chain hoist ER2 for electrical parts, push button switch, power feeding and electrical characteristics.
Operational check
Brake
Strange noise
Executed by
Checked by
146
Code Capacity
ER2
MR2
TS2 (TSG)
TS2 (TSP)
Check method
Check the execution
Check the execution
Visual inspection
Measurement
Visual inspection/
inspection by
measurement
Visual inspection/
inspection by
measurement
Visual inspection/
inspection by
measurement
Visual inspection/
inspection by
measurement
Visual inspection
Visual inspection
Visual inspection
Visual inspection/
inspection by
measurement
Visual inspection
Visual inspection
Visual inspection
Traveling operation with a
capacity
Visual inspection/inspection
by measurement
Traveling operation with a
capacity
Visual inspection/inspection
by measurement
Traveling operation with a
capacity
Visual inspection/inspection
by measurement
Inspector
Maintenance Engineer
Lot No. Your CTRL No. Installation date Location Inspection Certification valid thru
Criteria
When performing periodic inspection, also perform
the daily inspection.
When performing periodic inspection, also perform
the frequent inspection.
• To have no deformation, flaw and damage on the
brake drum and motor cover
• To have no deformation, flaw and damage on
brake spring
Abrasion to be less than limit value
• To have apparent deformation and damage
• Abrasion of outer diameter to be less than limit
value
• To have no apparent deformation and damage
• Abrasion of outer diameter to be less than limit
value
• To have no apparent deformation and damage
• Abrasion of outer diameter to be less than limit
value
• To have no apparent deformation and damage
• Abrasion of outer diameter to be less than limit
value
• To have no damage, breakage and grease leakage.
• To have no apparent abrasion, deformation and damage
• To have no attachment of paint, oil and foreign matter
• To have no dust and powder due to abrasion
• To have no deformation of beam flange such as
twist and shear drop
• To have no exceeding abrasion of rail surface
To be mounted securely without looseness and
come-off
To be mounted securely without looseness and
come-off at the rail end
To be connected securely without deformation and
damage
Perform inspection of the items on function/performance
of daily inspection with no load, and then perform the
inspection of the same items with a capacity.
• To travel smoothly without serpentine motion and
vibration
• Stopping distance of traveling to be within 10 %
of the traveling distance, when no swinging of a
load
• To have no irregular rotating noise
• To have no motor hamming or scraping noise of a
brake
Inspection date/result
/ / / / / /