KITO ER2 Serie Manuel Du Propriétaire page 51

3 t~5 t (For Double Chain type)
●
1) Fix the Suspension Shaft to the Frame G or
the Frame S with a Suspension Shaft Bolt, a
slotted nut and a split pin.
• When fixing the Frame G or the Frame S to the
Suspension Shaft, use the hole for standard rail
width. Use the hole for rail width 175 mm or 190 mm
for one stage up rail width. Open the both ends of the
split pin by 70˚ or more.
• Attach the split pin to the right side when viewed from
the Frame G or the Frame S.
• Open the both ends of the split pin by 70˚ or more.
2) Set the Suspension Shaft with a Thin Spacer,
Thick Spacer and Fixing Spacer.
3) Set the Suspender with the Suspension
Shaft.
4) Set the Suspension Shaft with another Thin
Spacer, Thick Spacer and Fixing Spacer.
Then insert the Suspension Shaft into the
Frame SN.
• Adjust the Spacers in accordance with the rail width.
(Refer to "Checking the Number of the Assembled
Adjusting Spacers and Their Positions" (P48) for the
number of Spacers.)
5) Set the Suspension Shaft with a Thick
Spacer. Fix it with a Shaft Stopper Pin and a
split pin.
• Insert the Shaft Stopper Pin in the direction that the
split pin comes to the right when viewed from the
front side of the Frame SN.
• Open the both ends of the Split Pin by 70˚ or more.
6) Mount the Suspender to the Connection Yoke
with a Yoke Bolt, a slotted nut and a split pin.
Frame G
Split pin
Bolt
Suspender
Split pin
Suspender of
the Main Unit
Slotted nut
Frame SN
<Suspension Shaft>
Hole for one stage up rail width
Hole for standard rail width
Frame S (G) side Frame SN side
Split pin
70° or more
Bending split pin
Split pin
Frame S
Slotted
Bolt
nut
Thick spacer
Fixing spacer
Suspension Shaft
Fixing spacer
Thick spacer
Yoke Bolt
Split pin
Thick spacer
Shaft Stopper Pin
Shaft
Stopper Pin
Orientation of the
Shaft Stopper Pin
(to be continued)
1 1
51