KITO ER2 Serie Manuel Du Propriétaire page 29

■ 5-Push Button Switch Set
5-Push Button Switch Set is equipped with a lock type emergency stop button (VFD reset button) and lift/lower push
buttons. One-step push button switch or two-step push button switch is mounted as Lift/lower push button switches in
accordance with the specification of single speed or dual speed VFD specification. Refer to the operation method of the
corresponding specification.
Moving direction of the trolley is expressed as East/West for traveling motion in the operational instruction of the Push
Button Switch Set.
Emergency Stop Button (VFD Reset Button)
●
Operation Button
●
● Lift/Lower Button
No label for the
single speed
Dual
model
● Travel Button
1) Press the Emergency Stop Button
reset.
• The button is locked at the pressed end.
2) Turn the Emergency Stop Button
• Press-locked button returns to the original position.
* When the electric chain hoist is not used, press the Emergency Stop Button
Single Speed Model
1) Press button to lift the
load.
• The electric chain hoist stops
when the button is released.
1) Press button to lower the
load.
• The electric chain hoist stops
when the button is released.
Single Speed Model
1) Press button to move the
trolley to the east.
• The trolley stops when the
button is released.
1) Press button to move the
trolley to the west.
• The trolley stops when the
button is released.
deeply when carrying out an emergency stop or VFD
clockwise to cancel the lock.
deeply to the end.
Dual Speed VFD Model
1) Press button to lift the load.
2) When lifting the load at high speed, press the
button further to the end.
• The electric chain hoist stops when the button is
released.
1) Press button to lower the load.
2) When lowering the load at high speed, press the
button further to the end.
• The electric chain hoist stops when the button is
released.
Dual Speed VFD Model
1) Press button to move the trolley to the east at
low speed.
2) Press button further to the end to move the
trolley to the east at high speed.
• The trolley stops when the button is released.
1) Press button to move the trolley to the west at
low speed.
2) Press button further to the end to move the
trolley to the west at high speed.
• The trolley stops when the button is released.
1 1
(to be continued)
29