KITO ER2 Serie Manuel Du Propriétaire page 39

Case without Chain Container
●
When using the electric chain hoist without the Chain Container, take the following measures.
1) Mount the Stopper at the no-load side of
the Load Chain.
* Number of Links between Chain End Suspender
and the Stopper
Body size
B
C
D
E
F
* Tightening torque for the Stopper Bolt: 10 N·m
2) Mount the End Link of the no load side of
the Load Chain to the Chain End Suspender
with a Socket Bolt and a lever nut.
• Chain End Suspender is optional. Please
specify the Chain End Suspender when placing
an order of the electric chain hoist.
3) Combine the Chain End Suspender and
the body size of the electric chain hoist
(Chain Guide A) with a Socket Bolt and
lever nut.
• Be careful not to twist the Load Chain.
Double Chain Fall type>
<
Chain End Suspender is not used
for double chain fall type due to the
orientation of the chain.
Attach the terminal chain link directly to
Chain Guide A.
* When ordering a Chain End Suspender, please
refer to the part codes. (P121)
• When using the electric chain hoist, be careful not make the Load Chain at no load side impeded or entangled.
Failure to comply with these instructions may result in death or serious injury.
Mandatory
Body size ER2-B/C/D/E
Number of Links
21
15
15
Chain
15
Guide A
15
Cushion
Rubber
DANGER
Chain End
Suspender
*Number of
links
Stopper
Chain
Guide A
Cushion
Rubber
Chain
Guide A
*Number
of links
Cushion
Rubber
Stopper
Body size F
Chain End
Suspender
*Number
of links
Stopper
(to be continued)
1 1
39