KITO ER2 Serie Manuel Du Propriétaire page 143

• When any abnormality is observed during inspection, stop the use of electric
chain hoist, indicate "FAILURE", and contact the maintenance engineer or
KITO for repair.
Mandatory
Use of the product with abnormality may result in death or serious injury.
■ Motorized Trolley MR2 Frequent Inspection
■Check result : ○ Good, △ To be replaced (adjusted) next inspection, × Bad, Needs replacement (adjustment)
Category Check item
Daily inspection
Combination
Travel rail (guider)
Oiling
Refer to check table of electric chain hoist ER2 for electrical parts, push button switch, power feeding and electrical characteristics.
Executed by Inspector
Checked by Maintenance Engineer
■ Manual Trolley TS2 (TSG/TSP) Frequent Inspection
■Check result : ○ Good, △ To be replaced (adjusted) next inspection, × Bad, Needs replacement (adjustment)
Category Check item
Combination
Travel rail (guider)
Oiling
Executed by Inspector
Checked by Maintenance Engineer
DANGER
Check method
Check the When performing frequent inspection, also perform the
execution daily inspection.
Shake the hoist Electric chain hoist to swing right and left swiftly
Visual inspection To have apparent deformation and damage
Visual inspection To be oiled adequately
Check method
Shake the hoist Electric chain hoist to swing right and left swiftly
Visual inspection To have apparent deformation and damage
Visual inspection To be oiled adequately
Criteria
/
Criteria
/
NOTE
Decide the check items
appropriate to the
environment and operating
conditions of the customer.
Inspection date/result
/ / / / /
Inspection date/result
/ / / / /
A
143