Deformation And Damage Of Each Part; Operational Check; Brake; Indication Of Nameplates And Labels - KITO ER2 Serie Manuel Du Propriétaire

• When any abnormality is observed during inspection, stop the use of electric
chain hoist, indicate "FAILURE", and contact the maintenance engineer or
KITO for repair.
Mandatory
Use of the product with abnormality may result in death or serious injury.
■ Motorized Trolley MR2 Daily Inspection
■Check result : ○ Good, △ To be replaced (adjusted) next inspection, × Bad, Needs replacement (adjustment)
Category Check item
Indication of nameplates
and labels
Deformation and
damage of each part
Bolts, nut, split pins

Operational check

Brake

Executed by Inspector
Checked by Maintenance Engineer
■ Manual Trolley TS2 (TSG/TSP) Daily Inspection
■Check result : ○ Good, △ To be replaced (adjusted) next inspection, × Bad, Needs replacement (adjustment)
Category Check item
Indication of nameplates
and labels
Deformation and
damage of each part
Bolts, nut, split pins
Operational check
Executed by Inspector
Checked by Maintenance Engineer
DANGER
Check method
Visual inspection To have no peeled off. To be legible clearly.
To have no apparent deformation and corrosion
Visual inspection
Frame to have no apparent deformation
Visual inspection or To have no loosened bolts, nuts, and split pins that can
inspection with tools be seen from exterior. To have no come-off.
• To travel smoothly. To have no serpentine motion and
vibration.
• Electric Chain Hoist operates in the same direction as
that of the push button operation
• Motor to stop immediately when stopping the
operation
Traveling operation
with no load • All operations to stop when Emergency Stop is
pressed
• Electric Chain Hoist not to operate when pressing the
push button while Emergency Stop is pressed
• Electric Chain Hoist to operate normally when
canceling Emergency Stop
Traveling operation When stopping the operation, brake to operate securely
with no load and motor to stop immediately.
Check method
Visual inspection To have no peeled off. To be legible clearly.
• To have no apparent deformation and corrosion
Visual inspection
• Frame to have no apparent deformation
To have no loosened bolts, nuts, and split pins that can
Visual inspection
be seen from exterior. To have no come-off.
Traveling operation • To travel smoothly. To have no serpentine motion and
with no load vibration.
Criteria
/
Criteria
/
NOTE
Decide the check items
appropriate to the
environment and operating
conditions of the customer.
Inspection date/result
/ / / / /
Inspection date/result
/ / / / /
A
141