Daily Inspection Of Manual Trolley (Tsg/Tsp) - KITO ER2 Serie Manuel Du Propriétaire

Chapter 1 Handling the Product
How to use (continued)
■ Function and Performance
● Check the following item with no load.
Item
Operational
Check
1
Brake

■ Daily Inspection of Manual Trolley (TSG/TSP)

■ Appearance
Item
Indication of
Nameplates
and Labels
Deformation
and damage
of each part
Loosened
or fallen off
bolts, nuts
and split pins
26
Check method
• Press the push button to
check the operation.
• Press the push button to
check the operation of the
Brake.
Check method
• Check visually
• Check visually
• Check visually or using
tools.
Criteria
• To travel smoothly. No meandering and
vibration.
• The electric chain hoist moves in the same
direction as that of the push button operation.
• When the operation is stopped, the motor
stops immediately.
• When the Emergency Stop Button is pressed,
all hoist motions stop.
• When operating other push button while the
Emergency Stop Button is pressed, the hoist
does not start operation.
• When canceling the Emergency Stop Button,
the hoist operates normally.
• When the operation is stopped, the Brake is
applied and the motor stops immediately.
Criteria
• No peel off. Indication can be seen clearly.
• No apparent deformation and corrosion
• No apparent deformation on the Frame
• Bolts, nuts and split pins are fastened
securely.
DANGER
• Even a drop off of a split pin may
cause of drop of the body size.
Be sure to check it.
Mandatory
Drop off of split pin may result in death
or serious injury.
When failed
Refer to Chapter 2
"Failure Cause, Guidance
for Countermeasure" (P94
to 97).
Carry out the inspection in
accordance with the items in
Chapter 2
"Periodic inspection"
Electromagnetic Brake
(P84).
When failed
Clean and repair the label
or replace with a new label.
Replace the deformed or
damaged part.
Fasten bolts, nuts and split
pins securely.