KITO ER2 Serie Manuel Du Propriétaire page 15

■ Checking the Marks
• Be sure to check that the Load Chain has 'RH-DAT' or 'FT-DAT' mark on it and the chain size is appropriate for the
ER2 model you are using (See the following table.). The Load Chain of other models (such as model ES or ER) or
different rating cannot be used.
Mandatory
Use of the Load Chain of other model or other rating may result in death or serious injury due to the drop of the lifted load.
Load Chain size :
Code
diameter (mm)
ER2-001H/IH/HD
4.3
ER2-003S/IS/SD
ER2-003H/IH
ER2-005L/IL/LD 6.0
ER2-005S/IS/SD
ER2-010L/IL/LD
7.7
ER2-010S/IS/SD
ER2-015S/IS/SD 10.2
ER2-020C/IC/CD 7.7
ER2-020L/IL/LD
10.2
ER2-020S/IS/SD
ER2-025S/IS/SD 11.2
ER2-030S/IS/SD 10.2
ER2-050S/IS/SD 11.2
■ Recording the Product No.
● Fill in the table in the right with product's
Lot No., Serial No. (described in the
product nameplate), date of purchase and
the name of the sales shop where you
purchased the product.
* When requesting repair or ordering a
chain hoist part, please inform us of
these pieces of information together.
■ Recording the Initial Value
● When opening the package, fill in
the table in the right with the opening
dimension "a" between embossed marks
on the Bottom Hook, the width of the
hook "b" and the thickness of the hook
"c". (These values are used for checking.
Record the value for the top hook of ER2
when it is used individually.)
DANGER
The mark (RH-DAT) to indicate the model of the Load
Mark Mark pitch
Chain is indicated on it at an equal spacing. Make sure
that the Load Chain is of a chain size (wire diameter)
FT-DAT 24 Links
appropriate for ER2 referring to the table in the left.
20 Links
20 Links
Second mark
16 Links
RH-DAT
20 Links
Front side : RH-DAT
16 Links
Back side : H23
12 Links
16 Links
12 Links
Item
Lot No.
Serial No.
Date of purchase
Name of the sales shop
Embossed marks
a
Mark pitch
RH-DAT 0000
First mark
Front side : Original Lot No. of the
or
FT-DAT
Back side : KITO
Electric chain hoist Motorized trolley
Dimensions when the package was opened
Top Hook
(For ER2 only)
c
Bottom Hook
b
RH-DAT
Second mark
Load Chain (4 digits)
Manual trolley
Dimension a mm
Dimension b mm
Dimension c
mm
Dimension a mm
Dimension b
mm
Dimension c mm
1 1
15