KITO ER2 Serie Manuel Du Propriétaire page 46

Chapter 1 Handling the Product
Assembling (continued)
■ Combination of the Electric Chain Hoist and the Motorized Trolley
Mandatory
125 kg~5 t
●
1) Fix the Suspension Shaft to the Frame G with a
Suspension Shaft Bolt, a slotted nut and a split
1
pin.
● When fixing the Frame S and the Suspension Shaft, use the
hole A. If the gap between the rail end and the wall of the
housing is scarce to install the electric chain hoist to the travel
rail, use the hole B. (Refer to "Mounting the Hoist to the Travel
Rail" (P58).)
Prohibited
2) Fix the Fixing Shaft to the Frame G with a split
pin.
3) Set the Suspension Shaft with a Thin Spacer, Thick
Spacer and a Thick Spacer L.
4) Set the Suspender T of ER2 Body size with the
Suspension Shaft and the Fixing Shaft.
5) Set the Suspension Shaft with another Thin
Spacer, Thick Spacer and Thick Spacer L. Then
insert the Suspension Shaft into the Frame S.
• Adjust the Spacers in accordance with the rail width.
(Refer to "Checking the Number of the Assembled
Adjusting Spacers and their positions" (P45) for the
number of Spacers.)
6) Set the Suspension Shaft with a Thick Spacer.
Insert the Shaft Stopper Pin into the Hole A and
fix it with a split pin.
• Insert the Shaft Stopper Pin in the direction that the split
pin comes to the left when viewed from the front side of
the MR2 Connection Box.
46
• Use new split pins. After insertion, bend the pin securely at its both ends.
Use of old split pins may result in death or serious injury due to drop.
DANGER
• The hole B on the Suspension Shaft is the hole for
mounting work (temporary assembly). Do not use
the hole for the adjustment of rail width.
Failure to comply with this instruction may result in death or
serious injury.
DANGER
Frame G
Split pin
Slotted nut
Hole for one stage
up rail width
Hole for one stage up rail width
Hole for standard rail width
Frame G
Split pin
Thin spacer
Suspension Shaft
Split pin
Slotted nut
Fixing Shaft
Thin spacer
Suspender T of Main Unit
Frame S
Suspension Shaft
Bolt
Suspension Shaft
Hole for standard
rail width
<Suspension Shaft>
Hole A Hole B
Frame G
Bracing Shaft
Split pin
Thick spacer
Thick spacer L
Split pin
Shaft Bolt
Hole A
Hole B
Thick spacer L
Thick spacer
Shaft Stopper
Pin
Split pin